This core is an original creation by @agg23. It is based strongly on the original documentation for the Game and Watch CPU (see Documentation Overview), but additional supported CPUs in the core (like the SM5a) are based entirely on MAME's implementation. I have tried to accurately transcribe and rewrite the existing documentation and MAME's code into a more understandable, fewer error form. The Pocket platform icon was created by Random11. See Licensing for more information.

Currently supported platforms are the Analogue Pocket and MiSTer.

See Platform Installation Instructions for platform-specific instructions on how to install the core.

A tool is provided to generate ROMs from MAME ROMs for all of the supported devices. See ROM Generator for more information about generating the ROMs.

The Game and Watch (and related) series of devices used varied hardware for each device. The currently supported CPUs are:

• SM510 - The "base" CPU the other's were based off of - Donkey Kong, Fire Attack, Mickey and Donald, etc
• SM510 (Tiger Variant) - Experimental - Street Fighter 2, Double Dragon, etc
• SM5a - Ball, Octopus, etc

The ROM Generator will read the attached manifest.json file to determine what CPU is used by each game. You can manually look through this file yourself, or use the generator tool to determine if a game is supported at this time.

For homebrew titles (I only know of Bride and Squeeze), you should rename the artwork and roms zips to have the hbw_ prefix, and the name of the game. Thus Bride becomes hbw_bride and Squeeze becomes hbw_squeeze.

Squeeze does not run correctly due to having a completely different artwork design than any other core. See #11 for more information.

• 720 x 720 pixel resolution
• Ability to show inactive LCD segments with configurable opacity
• Deflicker on the LCD
• VSync after the deflicker has taken place

• Show Inactive LCD - LCD segments that are inactive (off) remain displayed. See Inact. LCD Alpha
• Inact. LCD Alpha - Inactive LCD Alpha - If Show Inactive LCD is on (or this setting is set on MiSTer), sets the opacity of the disabled segments. Defaults to approximately 5%, or 13/255.
• Acc. LCD Timing - Accurate LCD timing - By default, the Game and Watch's LCD pulses at 64hz, which is what drives the static LCD screen. However, due to lack of persistence of our modern LCDs, this just results in a bunch of flicker. Instead when this setting is disabled, the LCD data will be updated at 1000 Hz. Enabling this setting updates the LCD at 64 Hz.

I've tried to be thorough with my design decisions and provide/update various supporting documents through the process. See the /docs folder, or start looking at the Overview.

There are a lot of components to this project, and the licensing on them depends on where they came from and potentially how they're used.