GNSSLogger is a cross-platform C++ project designed to capture, parse, and log NMEA GPS/GNSS data from a serial port (COM port).

It provides real-time GNSS data processing, logging, and monitoring capabilities, and is compatible with Windows and GNU/Linux.

• Capture raw NMEA data from a specified COM port
• Parse NMEA sentences (GNRMC, GNGGA, GNGSA)
• Real-time GNSS data processing and validation
• Configurable baud rate and logging duration
• Raw data logging to file
• Parsed data logging with human-readable format
• Cross-platform support (Windows and GNU/Linux)
• NMEA coordinate conversion to decimal degrees
• Distance calculation between two GNSS coordinates
• NMEA checksum validation

• C++11 compatible compiler
• CMake 3.10 or higher
• Windows or GNU/Linux

1. Clone the repository:

   git clone https://github.com/bvernoux/gnsslogger.git
   cd gnsslogger
   

2. Create a build directory and run CMake:

   For Windows (Visual Studio 2022):

   rm -rf build_VS2022
   mkdir build_VS2022 && cd build_VS2022
   cmake -G "Visual Studio 17 2022" -A x64 -DBUILD_TESTS=OFF -DCMAKE_BUILD_TYPE=Release ..
   

   For Windows MinGW64:

   rm -rf build_MinGW64
   mkdir build_MinGW64 && cd build_MinGW64
   cmake -G "MinGW Makefiles" -DBUILD_TESTS=OFF -DCMAKE_BUILD_TYPE=Release ..
   

   For GNU/Linux:

   rm -rf build
   mkdir build && cd build
   cmake -DBUILD_TESTS=ON ..
   cmake -DBUILD_TESTS=OFF -DCMAKE_BUILD_TYPE=Release ..
   

3. Build the project:

   For Windows (Visual Studio 2022):

   cmake --build . --config Release
   

   For MinGW64 and GNU/Linux:

   cmake --build .
   

   For a specific build type (e.g., Debug):

   cmake --build . --config Debug
   

Run the gnsslogger executable with the following arguments:

gnsslogger <port> [options]
Options:
  --raw_out_file=<filename>    Specify the raw output file
  --parsed_out_file=<filename> Specify the parsed output file
  --duration_seconds=<seconds> Specify the duration in seconds
  --baudrate=<rate>            Specify the baud rate

• <port>: The name of the serial port (e.g., "COM3" on Windows, "/dev/ttyACM0" on Linux).

• --raw_out_file=<filename>: Specify the raw output file where NMEA data will be saved.

• --parsed_out_file=<filename>: Specify the parsed output file where processed GNSS data will be saved (csv format).

• --duration_seconds=<seconds>: Specify the duration of logging in seconds. Use -1 for continuous logging (default: -1).

• --baudrate=<rate>: Specify the baud rate for the serial port (default: 9600).

Windows:

gnsslogger.exe COM3 --raw_out_file=raw_output.txt --parsed_out_file=parsed_output.csv --duration_seconds=300 --baudrate=115200

GNU/Linux Ubuntu:

./gnsslogger /dev/ttyACM0 --raw_out_file=raw_output.txt --parsed_out_file=parsed_output.csv --duration_seconds=300 --baudrate=115200

• options:
  • Raw NMEA sentences are saved to the specified raw output file.
  • Parsed GNSS data is saved to the specified parsed output file in a csv format.
• Real-time status updates are displayed in the console, including GPS/GNSS date/time, current position, fix quality ...

Example Real-time console display (refreshed each second)

Date Time: 280924 194612
Latitude:  xx.xxxxxx°
Longitude: xx.xxxxxx°
Altitude:  420.0 m
Speed:     0.0 knots (0.0 km/h)
Heading:   0.0°
Satellites used: 12
Fix Quality: 1 (Standard)
Fix Type:    3 (3D)
HDOP: 0.66 PDOP: 1.26 VDOP: 1.08 Nb PRNs: 17
Status: Valid Fix

• nmeaToDecimalDegrees(): Converts NMEA coordinates (in DDMM.MMMM or DDDMM.MMMM format) to decimal degrees. It supports directions for both latitude and longitude.
• calculateDistance(): Calculates the distance between two geographic points (latitude and longitude) using the Haversine formula.
• calculateBearing(): Calculates the initial bearing (forward azimuth) between two points (latitude and longitude) on Earth.
• validateNMEAChecksum(): Validates the checksum of an NMEA sentence to ensure data integrity.
• fixTypeToString(): Converts an integer representing the GNSS fix type to a corresponding string (e.g., "NA", "2D", "3D").
• fixQualityToString(): Converts an integer representing the GNSS fix quality to a corresponding string (e.g., "Invalid", "DGPS", "PPS fix").

Contributions to GNSSLogger are welcome!

Please feel free to submit pull requests, create issues, or suggest improvements.

To build and run tests (if implemented):

cmake -DBUILD_TESTS=OFF ..
cmake --build .
ctest

This project is licensed under the MIT License - see the LICENSE file for details.